RENSON® TC45 is an innovative thermal break trickle ventilator designed to be installed on the glazing unit. Its exterior part features a rounded design, while the inner element is perforated. The perforation in the inner section serves as a barrier against insects and can be effortlessly cleaned. The inner flap directs incoming air upwards and can be adjusted to five different positions, allowing precise control over the amount of incoming air according to your needs.

TECHNICAL DATA

Airflow rate in m3/h per linear meter: 41m3 at a pressure difference of 2Pa, 59m3 at a pressure difference of 4Pa, 93m3 at a pressure difference of 10Pa.
Ventilation slot area: 11,333 mm2/m.
Maintains water tightness at pressure differences up to 600Pa.

GALLERY

MATERIAL

The inner and outer profiles are made of aluminum (Al Mg Si 0.5).
The end caps are made of a durable, UV-resistant material that is also resistant to discoloration (ASA Polymer type Luran S).
Thermal insulation is made of PVC.

COATING

Standard coating options:
- Raw,
- Epoxy coated in silver (E6/EV1, +/- 20 microns),
- Powder-coated in RAL 8019, RAL 9016 colors (+/- 60 microns).
Custom coating options:
- Any of 150 RAL colors,
- Possible dual-color coating.

DIMENSIONS

Overall height: 60mm.
Height in the glazing: 50mm.
Glazing package thickness: 20, 24, or 28.

DELIVERY

Supplied in lengths of 6000mm.
Maximum length of the ventilation grille is 2500mm.

MAINTENANCE

The ventilation grille can be easily cleaned with a damp cloth or a vacuum cleaner.

SELF-INSTALLATION

Simple and fast preparation of the ventilation grille from 6000mm lengths.
After cutting to the desired size and attaching the side caps, the TC45 is ready for installation on the glazing.
It is recommended to use a special seal from RENSON® No. 049 for glazing installation.
The total size of the ventilation grille (T) = cut size (Z) + 2 x K = glazing size.

CONTROL

Manual control using a cord, by means of a cord, or with a motor.

AR 75

Ventilation grille with a thermal insert, equipped with a self-regulating airflow system, designed for installation on glazing.

TC 60

Ventilation grille with a thermal insert, without self-regulation, designed for installation on glazing, featuring a perforated inner part.

THM 90

Ventilation grille with a thermal insert, self-regulation of airflow, and an aluminum PVC damper for installation on glazing.

Do you want to know the price of your new windows?

Get a quick and free quote now!

Our products guarantee comfort, safety, and energy savings

Ventilation Grille AR 75

AUTOMATIC REGULATION

AR75 is equipped with a damper made of PVC that allows for airflow control through the vent. Adjusting it with a lever enables you to achieve maximum airflow or close the device. Additionally, a movable diaphragm, responsive to pressure differences, is installed in the device. Its function is automatic airflow regulation after surpassing specific pressure difference values.

CONSTRUCTION SPECIFICS

The external profile, made of extruded aluminum, also serves as a drip cap. It is connected with a connector made of rigid PVC, acting as a thermal barrier, to the internal profile element. The internal profile is also made of extruded aluminum. This material allows the vent to undergo a powder coating process. Possible coatings include EV1 or a color from the RAL palette.

The internal profile contains openings (2.9×20.3mm) that ensure airflow while preventing the entry of insects.

The end caps, made of rigid PVC, are equipped with a lever for opening or closing the vent and a connector with foam gasket responsible for the precise connection of the vent to the glass unit.

AIRFLOW

The AR75 vent is adaptable to achieve various airflow values. These values are achieved through the use of special restrictors (a patented solution). Each restrictor is made in a different color and corresponds to a specific airflow rate (at 2Pa):

AR75 SMALL (53.7 m³/h/m), green restrictor
AR75 MEDIUM (67.1 m³/h/m), blue restrictor
AR75 LARGE (77.3 m³/h/m), white restrictor
AR75 XLARGE (100.9 m³/h/m), black restrictor.

BURGLAR RESISTANCE CLASS

WK2, according to standards PREN 1627 to 1630

Note: The window must also meet the conditions of this burglar resistance class.

MATERIAL AND COATING

External and internal profile: Aluminum AlMgSi 0.5 Coating: Epoxy-coated aluminum (E6/EV1) -20 microns or powder-coated (60 -70 microns) in RAL palette colors, dual-color version possible. Thermal barrier: PVC Side caps: ASA-Polymer type Luran S. Side cap colors: white, black (other colors available upon request).